Replacing the BMW M54 Crankcase Ventilation System, Part 1 of 3

Date: February 18, 2012 |admin | Ecommerce

Learn how to replace the crankcase ventilation system (PCV) on your BMW. In this three-part series, Bavarian Otto shows you how to do it yourself and save hundreds of dollars over what a dealer would charge. Everything you need for the job is available in our online store at www.bavauto.com Have a tech question about your BMW or MINI? Find the answer at blog.bavauto.com

Comments

guri11214

Date: March 28, 2011 |

thanks a lot

Operator21

Date: April 7, 2011 |

I can’t here the video

BavarianAuto

Date: April 9, 2011 |

@Operator21
We’re sorry for the trouble. We have found that our videos are having trouble playing the audio on some computers. We are researching this. In the mean-time, please try it on a different computer.

popey2000

Date: April 15, 2011 |

Thankyou very much for this video! I have just completed this job and it went very smoothly. I found that removing the DISA valve helped me to get to the jubilee clips on the intake boots. Total time was about 4.5 hours work time. Car is now running great!

sataraid

Date: May 26, 2011 |

Nice video I want a tight fit ratchet!!

BavarianAuto

Date: June 8, 2011 |

@sataraid

Just gop to our website to purchase the Tite-Reach wrenches (very useful tools)

bavauto.com

mujjuman

Date: June 9, 2011 |

@pelepihuamo my mech charged me $950

jub3box

Date: June 18, 2011 |

Amazing Video!
I have been researching the reasons why my car is burning 1.5 litres of oil every 800-1000 miles. Everything I’ve found so far points to the the PCV (some call it CCV). There are no visible tells ie no blue smoke and no oil leaks yet I’m losing an excessive amount of oil. I have a 330 ci (e46) and was woundering if the installation process is the same as the M54 as shown. Also from the symptoms I have described, do you think this is a clogged PCV?

richardbrown28

Date: June 20, 2011 |

You guys ROCK! Thank you for the Video, HUGE help man.

BavarianAuto

Date: June 20, 2011 |

@jub3box
Yes, the most likely culprit in the oil usage is the oil separator / ventilation valve. Often, you may not notice the oil burning, in the exhaust, due to the catalytic converter masking it. Your 330ci will be basically just like the video. Just give us a call at 800-535-2002 or bavauto.com and we can set you up.

oscarv362370

Date: June 25, 2011 |

@mujjuman REALLY!!!!!!!!!!!!!!!!!!!!!! DAMN THAT’S EXPENSIVE!!! MY FRIEND CHARGED ME 250 WITH THE PCV VALVE, AND THE FOUR HOSES, WHERE YOU FROM?

Operator21

Date: August 29, 2011 |

Thanks a million finally got around to this on Friday before the hurricane and this video saved me a lot of money thanks Otto!!! Only one difference I guess there is some kind of vaccum hose t

Operator21

Date: August 29, 2011 |

Thanks a million finally got around to this on Friday before the hurricane and this video saved me a lot of money thanks Otto!!! Only one difference I guess there is some kind of vaccum hose thats connected to one side of the oil separator I replaced it with a blue silicone hose. Maybe because mine is the M52TU motor but any way thanks again.

BullShifter100

Date: December 7, 2011 |

Thanks, here I thought I had to remove the intake. Total time 2.5hrs, not bad for the first time.

Kubilayk

Date: December 26, 2011 |

What would be the symptoms to replace this tough part? May the rough idling be one of them? Or a 2 secs hssss sound just when you shut the engine off? Thanks

dopedyck

Date: January 6, 2012 |

@BavarianAuto Update java, and clear cookies and history in browser.

BavarianAuto

Date: January 18, 2012 |

@BullShifter100 –
Yes, good time for going at this for the first time.

BavarianAuto

Date: January 18, 2012 |

@Operator21 –
The M52TU engines have a cable operated throttle vs. the electric throttle on the M54 engines. The M52tu has a vacuum hose that runs from a nipple on the oil separator to the fuel pressure regulator, at the front of the fuel rail. Simply remove the plug on the nipple (on the new valve) and install the new supplied vacuum hose.

jruiz0305

Date: January 19, 2012 |

wow this instructor is amazing, so easy to follow and very thorough, i just did this job, for months I didn’t know where my oil leak was coming from. I discovered the oil dip hose was cracked. The only thing I would recommend to those doing this job is, remove the DISA valve(it makes the job easier) and remove the Idle Control Valve for a good maintenance cleaning (might as well since you have already removed the major intake hose)

BavarianAuto

Date: January 20, 2012 |

@jruiz0305 –
Thanks for the great words. Good and helpful comments, as well.

Leave a Comment

Name (required)
Website
Your Message (required)